100% solids, highly chemical resistant and wear resistant, low viscosity, thin film 100% Novolac epoxy. ARC CS4 industrial coating is a concrete overlayment designed to:
ARC EG-1 FC is a three part, 100% solids, rapid setting epoxy grout that can return damaged concrete surfaces to foot traffic in as little as 1 hour and can sustain tow motor traffic within 6 hours of application.
Use ARC EG-1 to resurface damaged concrete surfaces quickly, including voids up to 12 inches. ARC EG-1 bonds to damp or dry concrete, is fast-setting, and can be rapidly coated within 4 hours with other ARC coatings for improved chemical or mechanical protection.
ARC EG-1 is a 100% solids, three-part grout that uses a low viscosity, moisture-tolerant epoxy chemistry that is reinforced with a dried blend of graded and pigmented silica aggregates.
A 100% solids glass/ceramic reinforced novolac epoxy lining for high temperature aqueous cold wall corrosion conditions.
ARC HT-S industrial coating/lining is designed to:
Protect and upgrade new and old metal equipment
Perform in immersed aqueous solution conditions up to 150°C (302°F)
Replace exotic alloys, engineered plastics, ceramics, and conventional coatings
Easily apply by roller, brush, squeegee, or airless spray
Product Datasheet: ARC HT-S(E) – (English) – Available in EMEA Only
A rapid curing high impact resistant, 100% solids, epoxy/urethane hybrid with ceramic reinforcements for severe wear regions and impact.
ARC I BX1 RC industrial coating is designed to:
ARC MX FG is a trowel applied 100% solids, zero VOC, ceramic-reinforced epoxy coating designed for protecting surfaces against dry and wet slurry abrasive flow. This two-part system complies to 21 CFR 175.300 and is suited for direct food contact.
Use ARC MX FG to:
100% solids, ceramic reinforced, multi-component system, formulated for extreme impact, and sliding-wear abrasion, and impact caused by medium to coarse particle flow.
ARC MX1 industrial coating is designed to:
100% solids, ceramic reinforced, multi-component system, formulated for extreme sliding-wear and abrasion caused by fine particles.
ARC MX2 industrial coating is designed to:
A 100% solids, mineral-reinforced, high-build coating to protect structures against chemical corrosion and erosion.
ARC S1HB is designed to:
Product Availability: North America, Latin America, and Asia Pacific
100% solids, high build coating to protect structures against chemical, erosion and corrosion attack. ARC S1PW HB is certified for cold water service requiring NSF 600 compliance and NSF 61 certification.
ARC S1PW HB is designed to:
100% solids, reinforced thin film coating to protect structures against erosion, corrosion, and chemical attack.
ARC S1PW details:
100% solids, ceramic reinforced thin film coating to protect structures against erosion, abrasion, and corrosion. ARC S2 industrial coating is designed to:
ARC S2(E) available from European Warehouse only.
ARC S3 is suited for corrosive applications including those where direct food contact exposures is a requirement. This ceramic reinforced, 100% solids coating is tough enough to perform in both static and erosive flow conditions and complies with 21 CFR 175.300 for direct food contact exposures.
100% solids, advanced reinforced thin film coating to protect structures against extreme chemical attack. ARC S4+ industrial coating is designed to:
Sprayable coating for high-temperature immersion up to 180˚C (356˚F). Ideal for elevated temperature process vessels, and equipment exposed to heated fluids where high-temperature differentials may exist. Protects and upgrades new and old metal equipment.